Phenolic Plywood Birch black

Thuiswinkel Waarborg

Configure Phenolic Plywood Birch black

Product information

  • Smooth and hygienic surface
  • Strong board material
  • Moisture-resistant
  • No subsequent treatment required
  • Suitable for constructional purposes
  • Due to scratch sensitivity less suitable for decorative purposes
  • The edges of the board and any drill holes must be adequately protected against the penetration of moisture.
  • The top layer may vary in colour per board
  • Scratch sensitive

Description

Phenolic Plywood Birch is known for being very flat. It consists of birch plywood with a plastic layer on top and bottom, which makes the sheet suitable for many applications. The top layer of this variant of Phenolic Plywood Birch is black. The sheet is suitable for intensive use. Phenolic Plywood does not need to be finished, so you can start right away! Pay attention to the front sides, these should be treated in humid conditions.

Read more

Product properties

Specific gravity (kg/m3)650
AppearanceSilk gloss
Face gradeBB/BB
Thickness9 mm, 18 mm
Type Phenolic Plywood
VariantPhenolic Plywood Birch Black
GrainNo
Application (climate)Outside, if pre-treated
Wood type of surface layerBirch
Functional useConstruction and lumber
ColourBlack / Grey
PrimedNo
Glue typeWBP, Exterior
Sheet structureMultiple layers
Top layer typePhenolic coating
Top layer2 sides

Applications

  • Bodywork construction
  • Stable construction
  • Flight cases
  • Facade cladding
  • Interior and stand construction
  • Advertising signs
  • Trailers
  • Wall or ceiling coverings
Thuiswinkel WaarborgTOSIZE Furniture
Logo OPMAATZAGEN.nl
New!
Check out our new shelf cabinets 3D configurator
Create DIY projects in a breeze!
Curious about the 3D configurator?
Start designing right away

Order Phenolic Plywood Birch Black online

Phenolic Plywood Birch is a strong board material with a tight, black melamine top layer. This Phenolic Plywood, also known as multiplex board material, is suitable for visible work and with its tight birch edges a much-chosen wood type for making furniture. Order concreteplex birch black to measure, sawn or milled to the millimetre. There are several shapes and finishes available per thickness. View all possibilities in the product configurator.

Phenolic Plywood Birch black: what is it?

Phenolic Plywood consists of plywood with a special black plastic layer (phenol) on top and underneath. This is a very smooth and water-resistant layer, so that the board can be used for applications that have to withstand rough handling. This makes the board suitable for many applications and for intensive use. Good to know: the colour of the top layer can differ per board.

Phenolic Plywood does not need to be finished, so you can start right away! The inner plywood layer of this board is made of birch wood, so the board is always very flat. The plywood is glued water-resistant, but despite that it is still important to treat the front sides with an edge sealer, so that the moisture-resistant properties are reinforced.

Available thicknesses of Phenolic Plywood Birch black

With us you can order black concreteplex of high quality in different thicknesses. You can easily specify the desired thickness in the product configurator. This way you can be sure that the sheet material meets your requirements: both the format and thickness of the material. The following thicknesses are available: 9 mm and 18 mm.

Machining Phenolic Plywood Birch black

Phenolic Plywood is mainly used for formwork for pouring concrete. Because of its smooth and hard top layer, the product lends itself perfectly to this and owes its name to it. Because the plastic layer is very strong and waterproof, it can also be used for other applications. For example, covering for a company car, furniture in industrial environments, playground equipment, animal cages or a slide. But Phenolic Plywood birch is also used as an information board or in stand construction. However, it is important to properly finish the edges and (screw) holes of Phenolic Plywood with epoxy filler and/or an edge sealer.

Concreteplex falls in the category of constructive boards. The plate material is very strong and ideal for constructive purposes. However, plywood with a phenolic resin top layer like concreteplex birch black is very sensitive to scratches. Take this into account when choosing the right board!

Specific applications of Phenolic Plywood Birch black

Thanks to the plastic coating on both sides, Phenolic Plywood Birch can take a beating. Phenolic Plywood is mainly used for formwork for pouring concrete. This is what gives it its name. Phenolic Plywood Birch is mainly used for this purpose because the panel is always very flat. But because the plastic layer is very strong and waterproof, it can also be used for other applications. For example, cladding for a company car, furniture in industrial environments, playground equipment, animal cages or a slide. Because of its black colour, Phenolic Plywood Birch Black is also widely used in stand construction.

Alternatives to black Phenolic Plywood Birch black

Is Phenolic Plywood Birch black not the right panel for your job? Go for unfinished plywood birch or for plywood birch white. Also anti-slip concrete plywood is a good alternative when you are looking for strong concrete plywood with a slip-resistant and mesh-resistant top layer. Or take a look at our other types of phenolic plywood:

Recommended combinations

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects

Similar products

Complete your project