- OPMAATZAGEN.nl
- Do it yourself
- DIY Projects
Storage space under sloping roof for the attic, by Ruud
Storage space under sloping roof for the attic, by Ruud
Create this project yourself with sheet material cut to size by OPMAATZAGEN.nl!
This project was designed entirely from scratch: from cutlist to finish. Get inspired by the materials used below — and then think about how you would tackle it. We make sure the wood is accurate to the millimetre; the rest is up to you.
Description
Everyone knows the problems that a sloping roof in an attic entails if that space has to be used to store things. I opted to make a storage cupboard with six parts on wheels that can be moved out from under the sloping hood. This way you have excellent access to all your belongings without having to crawl into the bottom of a cupboard on your stomach. The whole is based on the dimensions of the blue crates, of which I had a set.
Custom cabinets under a sloping roof
The working drawing can be seen as an image.
The sawn parts were all perfectly sized, so it was a matter of placing a cabinet on its side to get an idea of the end result (see photo).
Then carefully cut the sawn parts of 1 cabinet Mark where the screw holes should be. then drill the holes.
The parts of the first cabinet were used as a template for the other five.
Then put everything together with wood glue and screws. It looked like a construction kit.
The dimensions of the project
1 part is 100.0 cm deep, 105.0 cm high and 55.0 cm wide.
There are a total of 6 parts next to each other.
Tip! Also check out our handy DIY tips!
Want to build this project yourself?
- Included: Complete kit incl. fittings and instructions
- Included: Design via 3D configurator
- Included: Fully made to your own measurements
- Not included: Edge finish of your choice
- Not included: Round or curved shapes also possible
- Not included: Each part available in a different wood type
Made-to-measure self-build kit
Prefer a complete kit? Design your furniture in our 3D configurator and receive all parts, fittings and instructions in one package.
- Not included: Complete kit incl. fittings and instructions
- Not included: Design via 3D configurator
- Included: Fully made to your own measurements
- Included: Edge finish of your choice
- Included: Round or curved shapes also possible
- Included: Each part available in a different wood type
Not all products from this project are still available. Create the cutlist yourself: every part cut to size, in the wood type and edge finish you want.
Create my own cutlist
