Chipboard Natural

Thuiswinkel Waarborg

Configure Chipboard Natural

Product information

  • Strong board material
  • Easy to process
  • Broadly applicable indoors
  • Not suitable for heavy loads in large areas
  • Coarse edges
  • Not moisture resistant


Chipboard natural is used, among other things, for levelling floors and for making worktops and cupboards. It is sensitive to moisture, so should only be used in rooms that are dry and indoors. Chipboard is easy to process. The natural version has a brown colour, showing the structure of the compressed fibres.

Read more

Product properties

Specific gravity (kg/m3)630
Thickness8 mm, 10 mm, 12 mm, 16 mm, 18 mm, 22 mm, 25 mm, 28 mm, 38 mm
Type Chipboard
VariantChipboard Natural
Application (climate)Indoors
Functional useConstruction and lumber
ColourBeige / Brown
Glue typeMR, Interior
Sheet structureWood chips
Top layer typeUnfinished


  • Bathroom and kitchen furniture
  • Interior design in wet rooms
  • Walls and floors
  • (Under)floors
  • Temperatures
  • Worktops
  • Desktops
  • Furniture Units
  • Kitchen cupboards
  • (Book) cabinets
  • Partition walls
  • Shelves
Thuiswinkel WaarborgTOSIZE Furniture
Check out our new shelf cabinets 3D configurator
Create DIY projects in a breeze!
Curious about the 3D configurator?
Start designing right away

Chipboard natural online order

Would you like to order a made-to-measure desktop or shelf online? Go for chipboard natural and order it online cut to the millimetre. Spaanplaat is often used for worktops, cupboards, levelling floors and installing partition walls. We deliver the panel fully customised to your home. Are you curious about the possibilities? Configure your product and you will have your project finished in no time.

Chipboard natural: what is it?

Chipboard natural is easy to process. Like MDF and OSB, it belongs to the family of fibreboards. Chipboard is structurally strong, lightweight, easy to assemble and does not warp. As more than three quarters of chipboard consists of residual wood, it is a durable product. Compared to MDF, the structure is coarser. This makes it more difficult to shape edges and corners than MDF. Furthermore, just like MDF, chipboard natural can be machined in all kinds of shapes and can be lacquered. However, it is necessary to prime chipboard first.

Chipboard natural is a constructional board. This means that this board material requires the necessary finishing before it can be used for visible work. Chipboard natural is not resistant to moisture. It is therefore only suitable for indoor projects in dry areas.

A sustainable choice

Chipboard natural is made of glued wood chips that are pressed together in three crosswise layers. This makes the board structurally strong. In comparison to MDF, coarser chips are used and in comparison to OSB, finer chips are used. Because a waste product (the wood chips) is used, chipboard is a sustainable product and relatively affordable.

Available thicknesses chipboard natural

With us, you can order standard customised chipboard in various thicknesses. You can easily specify the desired thickness in the product configurator. This way, you can be sure that the board material meets your requirements: both the format and the thickness of the material. The following thicknesses are available: 8 mm, 10 mm, 12 mm, 16 mm, 18 mm, 22 mm, 25 mm, 28 mm en 38 mm.

Machining of chipboard natural

Chipboard is good and easy to assemble or work with. When mounting the panel material, it is advisable to screw the screws to the rear or underside. That way, the screw holes are not visible. The fibres are held together by resin. Therefore, it is important to degrease the board properly before painting it. The material also sucks, which is why we recommend always finishing the edges with an edge sealer. For this reason, chipboard is only suitable for indoor applications and in dry conditions.

Are you going to paint chipboard? Then it is a good idea to countersink the screws and fill them with filler. Then sand and paint neatly in one go.

Specific applications of chipboard natural

Chipboard is widely used to make furniture. It is a versatile product that can be used for many purposes. For example, desk tops, cupboards, kitchen cupboards, bookcases, partitions or shelves. Furniture often has a large surface area, so the costs can mount up. Chipboard natural is a cheap board material with many possibilities.

Alternatives to chipboard natural

Is natural chipboard not the right type of wood for your job? Would you like the board material in a larger format or in a specific (RAL) colour? Then also take a look at  MDF lakdraagfolie.  You can easily paint this board material in your favourite colour. Or take a look at our other gemelamineerde meubelpanelen:

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects

Similar products

Complete your project