MDF Water-resistant Walnut American crown cut veneer

Thuiswinkel Waarborg

Configure MDF Water-resistant Walnut American crown cut veneer

Product information

  • Fibreboard with a natural, wooden appearance
  • Finished with a veneer cut to the grain
  • Easy to process
  • Strong material with high bending strength
  • Chic and warm appearance
  • For indoor use only
  • Natural wood, needs stain or lacquer finish


MDF Water-resistant Walnut American crown cut veneer variant for use in damp rooms. A bathroom cabinet is an example for which MDF moisture-resistant  is the perfect solution. The board consists of wood fibres that have been compressed under high pressure, and in the case of MDF damp-proofing a special water-resistant adhesive has been used for this purpose. In addition to these handy water-resistant properties, the board has a natural veneer layer of real wood that gives it a beautifully elegant finish.

Read more

Product properties

Specific gravity (kg/m3)750
Face gradeA/B+
Thickness19 mm
Type MDF V313
VariantMDF Water-resistant Walnut American crown cut veneer
GrainYes, lengthwise
Application (climate)Humid areas, if pre-treated
Wood type of surface layerWalnut
Functional useDecorative
ColourBeige / Brown
Colour shadeNatural / None
Glue typeMR, Interior
Sheet structureFibreboard
Top layer typeVeneer layer
Top layer2 sides

Order MDF Water-resistant Walnut American crown cut veneer to size online

Order cut-to-size MDF Water-resistant Walnut American crown cut veneer easily online. Veneered MDF can be cut to the millimetre. We deliver the panel fully custom-made to your home. Are you curious about the possibilities? Configure your product and you will have your project ready in no time.

MDF Water-resistant Walnut American crown cut veneer: what is it?

MDF moisture-resistant is a widely applicable board suitable for a variety of interior panelling applications where the space is humid, such as in bathrooms and kitchens. The V313 characteristic comes from the test for water resistance that the board material undergoes, called V313. It indicates that the board is not only water-resistant, but also water- and mould-resistant. Note that the board is not waterproof! water-resistant MDF boards are composed of dried wood fibres and glue. These wood fibres are then compressed under high pressure and temperatures to form an MDF board. In MDF moisture-resistant, a special, water-resistant type of glue is used. To enhance the water-resistant properties, the material is pressed under a higher pressure compared to MDF blank. The extra-hard pressing makes this type of wood easy to work with. water-resistant MDF boards can be recognised by their green core. MDF Water-resistant Walnut American crown cut veneer is not suitable for outdoor use.

MDF Water-resistant Walnut American crown cut veneer, sheet material with a natural top layer

Unlike melaminated board material, the top layer of veneered panels is a layer of real wood. This gives the material a calm, natural look. Because it is a natural product, there may be colour and texture differences between different panels. No two panels are the same. In addition, it is important that this panel is finished with a lacquer or oil as desired. This prevents discolouration and preserves the top layer. 

Veneered board material has the big advantage over solid board material that it does not warp. The MDF core of this board material gives it the advantages of MDF, but the appearance of solid and natural wood.

American walnut

Wood veneer with American walnut appearance has a warm and rich aesthetic, characterised by a deep brown colour with striking dark veins and stripes. The veneer often displays a distinctive grain pattern with contrasting lighter and darker tones.

The appearance of American walnut veneer is classic and timeless, making it suitable for a variety of interior styles. The colour of the veneer usually ranges from medium brown to dark brown, sometimes tending towards a hint of red, depending on the specific source and treatment of the wood.

American walnut wood veneer is often appreciated for its elegant and refined look, and it can be used for furniture, cabinets, interior finishes and decorative elements. Its distinctive grain pattern and deep, warm colour allow American walnut veneer to be integrated into a variety of designs, from traditional to contemporary, adding a sense of luxury and timeless beauty to interiors.

Crown cut or Quartered veneer

Cutting logs is usually done in two different ways: crown / plain or kwartiers. When the wood is cut crown / plain, long slices are cut lengthwise. This allows the flames of the material to be clearly seen and makes the best use of the wood. When the wood kwartiers is sawn, it is cut with the grain. This gives kwartiers sawn timber a calm appearance and relatively straight lines. In mix, these two techniques are processed interchangeably and used during veneer assembly. This creates a natural look and makes each panel unique.

Available thicknesses of MDF Water-resistant Walnut American crown cut veneer

You can order water-resistant MDF boards online in various thicknesses. So you can be sure that the board material meets your requirements: both the size and thickness of the material. The following thicknesses are available: 19 mm.

Editing MDF damp-proofing boards

MDF is very easy to work with: when milled and sawed, the material does not splinter. To do justice to the water-resistant properties of water-resistant MDF, it is important to seal the board properly. The top and bottom edges can be sealed with a primer or lacquer coating. The end edges deserve some extra attention. MDF fibers by themselves have an absorbent effect. With MDF moisture-resistant this is less than MDF clear, yet it is still important to treat these with an edge sealer. In addition, primer acts as a bonding agent, which will make the final coat of paint look nicer.

Specific uses of MDF Water-resistant Walnut American crown cut veneer

MDF is the material of choice for furniture and interior applications. This can be a cabinet, a wall or an entire surround. With this water-resistant variant, furniture is also suitable in the bathroom, garage or kitchen. Examples of projects include a partition wall in the bathroom or a window sill. Thanks to the decorative top layer of real wood, is extremely suitable for making bathroom furniture, kitchen cabinets and other furniture that is exposed to high humidity with some regularity.

Alternatives to water-resistant MDF

Are you looking for a type of wood suitable for outdoor applications? Then go for MDF tricoya. If your board material will be used in dry conditions, you can go for the more budget-friendly option: MDF Natural .Or check out all our other MDF board materials here.

DIY Inspiration blog

Get inspired by others

DIY Inspiration blog

View all inspiration projects

Similar products

Complete your project