A black MDF shelf for folders and a stand for the desk, by Benjamin

Related projects
TOSIZE Furniture
New!
Create DIY projects in a breeze!
Easy as a kit at home.
Start designing
TOSIZE Furniture
New!
Create DIY projects in a breeze!
Logo OPMAATZAGEN.nl
Start designing

Create this project yourself with sheet material cut to size by OPMAATZAGEN.nl!

Benjamin

Benjamin

DE

Easy

2 minutes

In this DIY project, Benjamin shows how he made a beautiful piece of storage furniture himself. By ordering cut black MDF to size, he was able to start his project straight away. The result was good.

Description by Benjamin

To complement Egon Eiermann's E2 desk frame, a shelf was to be made that can be loaded from the side. The shelf was to be divided into four compartments by a central cross. Black MDF 18mm was chosen as the material. The joints were to be steel-free (i.e. without screw or nail connections). Therefore, only glued dowel connections were used. The dimensions correspond to the axis dimensions of the desk.

How I made this project

The cut panels came in two packages. After the boards were laid out to fit together, the holes in the head side were drilled first. An 8mm drill with a depth limit of 31 mm was used for this. An 8mm dowel (approx. 40mm long) was then glued into each of these holes with a little glue. The matching counterparts were then made. This time with an 8mm drill into the surface, this time 11mm deep. Finally, all the boards were put together and held together with clamps.

Dimensions of my DIY project

77.0 x 72.2 x 30.8 cm (WxHxD)

Tip! Also check out our handy DIY tips!

How next?

Want to make this DIY project? Check out Benjamin's saw list and complete your order easily.

€ 135,83


All materials used

Explanation

View all sheet materials